Music


Posts filtered by tags: Suhr[x]


 

Suhr Guitar Talk :: RE: whammy bar tension and setup

Author: slateboy Posted: Mon Mar 18, 2019 1:58 pm (GMT -7) Topic Replies: 5 Drew7 wrote: Which model bridge is this? Some of the bridges Suhr uses have adjustable arm tension, I'm just not sure if you have one of them. Its an antique classic S. The bridge floats on two hex bolts. Solid block. Bent saddles and, like I mentioned, a hex head bolt on the underside that the trem arm screws into. The trem arm appears unthreaded at first glance because its an internal thread...
Tags: Music, Topic Replies, Suhr


Suhr Guitar Talk :: RE: whammy bar tension and setup

Author: Drew7 Posted: Mon Mar 18, 2019 12:57 pm (GMT -7) Topic Replies: 5 Which model bridge is this? Some of the bridges Suhr uses have adjustable arm tension, I'm just not sure if you have one of them. _________________"They can kill you, but the legalities of eating you are a little dicier." - David Foster Wallace
Tags: Music, Suhr


Suhr Guitar Talk :: RE: Dull sounding low E, worn out brass saddle on my T?

Author: CaptNasty Posted: Sun Mar 17, 2019 6:17 am (GMT -7) Topic Replies: 1 String height is set at very tight tolerances, an imperceptible reduction in action could be the difference between a bright, lively string and a buzzy, dead string. If your saddles developed deep grooves and then you started to notice this deadening, it is prudent to evaluate if the saddle wear plays a role. The saddle wear could be directly interfering with string vibration, or the action may have been lowered eno...
Tags: Music, Suhr


Suhr Owner's Gallery :: RE: First Suhr

Author: CaptNasty Posted: Thu Mar 14, 2019 5:29 pm (GMT -7) Topic Replies: 3 Received the guitar today. Wow. Really nice guitar and plays really nice. My Custom Shop Jackson DK1 and my Suhr are now competing to be my go to Axe.
Tags: Music, Topic Replies, Suhr, My Custom Shop Jackson


Suhr Owner's Gallery :: RE: First Suhr

Author: CaptNasty Posted: Thu Mar 14, 2019 8:04 am (GMT -7) Topic Replies: 2 That is a big part of what drew me to this guitar
Tags: Music, Suhr


Suhr Owner's Gallery :: RE: First Suhr

Author: Organic Posted: Wed Mar 13, 2019 4:26 pm (GMT -7) Topic Replies: 1 That vulcanized maple neck looks great!
Tags: Music, Topic Replies, Suhr


Suhr Owner's Gallery :: First Suhr

Author: CaptNasty Subject: First Suhr Posted: Tue Mar 12, 2019 7:19 pm (GMT -7) Topic Replies: 0 Hello everyone. Just picked up my first Suhr. It arrives this Thursday. A 2010 Suhr Modern Custom finished in Lexus Metallic Pearl. View Pics Here (These are not my pics, this is the sellers IMGUR album) Pretty stoked to get my hands on it.
Tags: Music, Suhr, Suhr Modern Custom


Suhr Guitar Talk :: RE: Third-party case for Modern?

Author: Organic Posted: Tue Mar 05, 2019 4:53 am (GMT -7) Topic Replies: 1 I've seen John recommend Gator. It is my understanding that Suhr used to work with SKB but had a falling out with them and no longer recommend their products.
Tags: Music, John, Suhr, SKB


Suhr Dealers :: Suhr Custom Classic!

Author: mattsmusic Subject: Suhr Custom Classic! Posted: Mon Mar 04, 2019 4:42 pm (GMT -7) Topic Replies: 0 Just in from Suhr! A great mix of shred and classic vibes on this one! $3499 shipped in the USA! PM for forum deals! SPECS: 2-Piece Swamp Ash Body 8lbs 2oz Trans Red Finish Gotoh 510 2-Post Solid Saddles Steel Block Bridge, Recessed 3 Ply Black Gloss Pickguard Suhr SSV Neck Pickup Suhr V60LP Middle Pickup Suhr SSH Bridge Pickup 5-Way Blade Pickup Selector Volume and Tone Cont...
Tags: Music, Usa, Suhr, Stainless Steel Medium Frets, Post Solid Saddles Steel Block Bridge Recessed


Suhr Guitar Talk :: RE: Who own's Suhr Guitars?

Author: Adambomb Subject: Re: Who own's Suhr Guitars? Posted: Sat Mar 02, 2019 7:03 pm (GMT -7) Topic Replies: 5 Suhr wrote: qwe200 wrote: A few years back (2015) there was an announcement that an investment company purchase some portion of Suhr. Anyone know if this ever happened? http://www.marketwired.com/press-release/avalanche-intl-agrees-to-buy-js-technologies-maker-of-suhr-guitar-otc-pink-avlp-2030545.htm No never happened, there was a big shift...
Tags: Music, Topic Replies, Suhr, John Suhr, Fender Gibson


Suhr Amp Talk :: RE: Reactive Load IR in use

Author: Suhr Subject: Re: Reactive Load IR in use Posted: Fri Mar 01, 2019 8:55 am (GMT -7) Topic Replies: 1 Yes they would be 1.2ms apart and will have comb filtering. This is easy to realign in the DAW. This is normal, one out is digital with the IR and the other not. This is common whenever you mix analog and DAC. Here is a cut an paste discussion with Pete Thorn about this from TGP. Contact sinasl1 Member corbetta said: ↑ It’s in the manual, under specs. Couldn’t you do what ...
Tags: Music, Suhr, UA, Celestion, Pete Thorn, Ownhammer


Suhr Guitar Talk :: RE: WTH?

Author: Suhr Posted: Fri Mar 01, 2019 8:35 am (GMT -7) Topic Replies: 7 qwe200 wrote: Yes. I do have plenty of posts complaining about pricing. And I'll continue to complain as long as we're seeing 10-20% increases a year. We only raised the price of our lowest priced models. No increase for the majority of our SKUs or customs. Price increases are a normal part of business. It costs us more to do business in California each year, health insurance, cost of materials, Tar...
Tags: Music, California, Suhr


Suhr Guitar Talk :: RE: Stainless Steel (fret wear)

Author: Suhr Posted: Fri Mar 01, 2019 8:33 am (GMT -7) Topic Replies: 21 DaeniusZ wrote: That's very unfortunate! Sometimes one of the less than stellar ones do slip through the cracks and it is frustrating to have to deal with them. As far as the knobs go though, I'm not sure if Suhr does this too but I had a brand new custom Tom Anderson with crackles in the knob. I emailed them and they said it's due to a new lubricant that they put in the pots to make them feel better w...
Tags: Music, Topic Replies, DaeniusZ, Suhr, Tom Anderson


Tech Talk :: RE: Bella + Reactive Load IR

Author: Suhr Posted: Fri Mar 01, 2019 8:28 am (GMT -7) Topic Replies: 2 Using the trick of a silent load along with the Bella half power you would essentially be using a 10W amp that sounds great at lower volumes. PBSON wrote: Got my questions answered via the excellent and very fast support: 1: It is not necessary to use the output jack on the "underside" of the amp to connect the internal combo speaker to the amp. You could use any of the other speaker outputs as they ar...
Tags: Music, Bella, Suhr, OHM, PBSON


Suhr Guitar Talk :: RE: The street price on a Modern Satin is now $2450?

Author: Drew7 Subject: Re: The street price on a Modern Satin is now $2450? Posted: Mon Feb 25, 2019 10:27 am (GMT -7) Topic Replies: 15 tak wrote: qwe200 wrote: Another thought about "arbitrary" price increases: When the latest signature models were first announced (prior to release), the street prices were advertised as $3995. There was such a backlash that prices were quickly reduced to $3495. How do you explain that? Did the cost of health care in CA su...
Tags: Music, Suhr


Suhr Guitar Talk :: RE: Who own's Suhr Guitars?

Author: Drew7 Posted: Mon Feb 25, 2019 10:24 am (GMT -7) Topic Replies: 3 Last I heard, in I think a Suhr press release, at the 11th hour John Suhr decided NOT to sell. If that changed or someone else bought the company I haven't heard. https://www.facebook.com/john.martin.610/posts/1765860470327112 _________________"They can kill you, but the legalities of eating you are a little dicier." - David Foster Wallace
Tags: Music, Suhr, John Suhr


Suhr Guitar Talk :: RE: WTH?

Author: DaeniusZ Posted: Wed Feb 13, 2019 2:22 pm (GMT -7) Topic Replies: 6 Drew7 wrote: Eh, Suhr's pricing is in line with what I see from comparable boutique custom-spec manufacturers. Even the mid-range semi-custom alternatives like Carvin, excuse me Kiesel, are increasing not THAT far behind Suhr. I'd love it if Suhrs were cheaper too, but the reality is compared to their peers, they're still pretty reasonable. I'd say Kiesel has far more options than Suhr, especi...
Tags: Music, Topic Replies, Suhr, Carvin, Suhrs, Kiesel, Gibson CS Suhr


Suhr Guitar Talk :: RE: Guitar pick up set-up

Author: gorguts Posted: Wed Feb 20, 2019 1:35 pm (GMT -7) Topic Replies: 4 Thanks for all the input guys, very helpful. I actually watched your videos Drew! before you replied Allright, couldn't wait more, so i ended up buying the Classic Antique, main thing that drove me was: 1/ Low output pick up for more dynamic, scope and low end 2/ I really love the tone of the neck pick up, amazingly Fender, but better I'm now a happy Suhr owner! So happy, and it sounds marvelous with my Laneu Lion...
Tags: Music, Suhr, Allright


Suhr Guitar Talk :: RE: WTH?

Author: Drew7 Posted: Wed Feb 13, 2019 7:08 am (GMT -7) Topic Replies: 6 Eh, Suhr's pricing is in line with what I see from comparable boutique custom-spec manufacturers. Even the mid-range semi-custom alternatives like Carvin, excuse me Kiesel, are increasing not THAT far behind Suhr. I'd love it if Suhrs were cheaper too, but the reality is compared to their peers, they're still pretty reasonable. _________________"They can kill you, but the legalities of eating you are a little dicier." -...
Tags: Music, Suhr, Carvin, Suhrs, Kiesel


Suhr Dealers :: Suhr Standard - Bengal Burst - 3A Roasted Birdseye neck!

Author: mattsmusic Subject: Suhr Standard - Bengal Burst - 3A Roasted Birdseye neck! Posted: Tue Feb 19, 2019 1:16 pm (GMT -7) Topic Replies: 0 Just arrived from Suhr! 3A Roasted Birdseye Neck and fingerboard! $3999 shipped in the USA! SPECS: 2-Piece Basswood Body 2-Piece Flame Maple Top, 3/16" Bengal Burst Finish Gotoh 510 2-Post Solid Saddles Steel Block Bridge Black Gloss 3 Ply Pickguard 3A Roasted Birdseye Maple Neck, Satin Finish Even C Medium Neck Back Shape .840 - .920 3A Roa...
Tags: Music, Usa, Suhr, Bengal, Suhr Standard Bengal Burst 3A Roasted Birdseye, Birdseye Neck, Piece Flame Maple Top, Post Solid Saddles Steel Block Bridge Black Gloss, Stainless Steel Medium Frets


Suhr Guitar Talk :: Guitar pick up set-up

Author: gorguts Subject: Guitar pick up set-up Posted: Sun Feb 17, 2019 2:08 am (GMT -7) Topic Replies: 4 Hello all, I want to buy a Suhr Classic, tried a few and they are amazing, now the question is which one. My main question is about the pick ups, Suhr have several and i strongly hesitate between 3 models. Forget about the look / color, i need your input on the tonality. I like nice and warm clean (fendery) and i need pick ups who can handle gain well (stoner Metal). I tried the Antique...
Tags: Music, Suhr, Mateuse Asato, UK Neck


Suhr Guitar Talk :: RE: WTH?

Author: Drew7 Posted: Tue Feb 12, 2019 9:14 am (GMT -7) Topic Replies: 1 Don't you have another thread complaining about Suhr pricing? They're not cheap guitars. They're still priced comparably to other similar high end guitars: This is the first hit for "charvel USA quilt top": https://reverb.com/item/17104645-charvel-usa-san-dimas-custom-shop-2h-solar-burst-quilt-top-guitar Here's the first hit for Ibanez J Custom: The price is no longer available on the page, but here's the first hi...
Tags: Google, Music, Usa, Suhr, Ibanez, Idunno, Fender Custom Shop Quilt Top


Suhr Guitar Talk :: Something new from Suhr?

Author: qwe200 Subject: Something new from Suhr? Posted: Sat Feb 09, 2019 11:38 pm (GMT -7) Topic Replies: 0 First time I've ever noticed a Suhr neck have this rounded shape where joining with the body. Typically the fretboard ends under the last fret and it's pretty much just squared off. Anyone know if this is something new? http://theamphouse.com/asccustompages/uploadedfiles/ZoomImages/Suhr-classic-iceblue-FpMNg-XwkcL-TleCi.jpg
Tags: Music, Suhr


Suhr Members Emporium :: FSOT: Suhr Custom Classic S

Author: sgill72 Subject: FSOT: Suhr Custom Classic S Posted: Wed Feb 06, 2019 7:21 am (GMT -7) Topic Replies: 0 Letting go this Suhr Custom Classic S. Comes complete with build sheet, fretboard protector, tools, and hardshell case. It's as new from Suhr. This guitar features a push push tone control that is a series/parallel switch for the bridge humbucker. Specs: Model: Custom Classic Color: Inca Silver Body: Alder, 2-Piece with Arm, Hand, and Tummy Contours Neck: Roasted Maple with Indi...
Tags: Music, Paypal, Steve, Suhr, Floyd, Stainless Steel Heavy Tuners


Suhr Guitar Talk :: Suhr Locking tuners

Author: JohnnyFavorite Subject: Suhr Locking tuners Posted: Mon Feb 04, 2019 2:15 pm (GMT -7) Topic Replies: 0 Anyone know who makes Suhr's current locking tuners? Is it Schaller, Hipshot or Gotoh?
Tags: Music, Topic Replies, Suhr, Schaller Hipshot


Suhr Guitar Talk :: RE: Stainless Steel (fret wear)

Author: MammutH Posted: Mon Jan 28, 2019 12:40 pm (GMT -7) Topic Replies: 20 DaeniusZ wrote: You could try emailing John directly Normally customer service should suffice but in this case it seems a bit off for them to assume their SS frets can have this kind of wear in such a short time given fairly normal playing. If you check the other thread about the guy's custom being delayed, the email is John at Suhr dot com Alright thanks for the tip! Ill contact him now and ...
Tags: Music, John, Topic Replies, DaeniusZ, Suhr


Suhr Guitar Talk :: RE: SUHR Pickup Mounting Ear Holes

Author: Suhr Posted: Mon Jan 28, 2019 11:43 am (GMT -7) Topic Replies: 16 JordanDupont wrote: The plan: I am going to get Vigier to send me a set of replacement plates so I can experiment without too much risk. I am thinking about tapping the middle hole of the plate with a 6-32 tap kit (as well as the pickup mounting hole) and put a hex set screw to connect the plate to the pickup. I think I'll have jusssst enough metal to work with but we'll see. Don't want to do that un...
Tags: Music, Don, Topic Replies, Suhr, PCB, Vigier, JordanDupont


Suhr Guitar Talk :: RE: Stainless Steel (fret wear)

Author: DaeniusZ Posted: Mon Jan 28, 2019 12:16 pm (GMT -7) Topic Replies: 20 You could try emailing John directly Normally customer service should suffice but in this case it seems a bit off for them to assume their SS frets can have this kind of wear in such a short time given fairly normal playing. If you check the other thread about the guy's custom being delayed, the email is John at Suhr dot com
Tags: Music, John, Topic Replies, Suhr


Suhr Guitar Talk :: RE: SUHR Pickup Mounting Ear Holes

Author: Suhr Posted: Mon Jan 28, 2019 11:39 am (GMT -7) Topic Replies: 16 Another company’s plates won’t fit our pickups. Our mounting is standard except re mounted controls. Then itbis juts a larger hole. To revert to pickguard you just need a tapped 3-48 plate on the other side, you can use PCB material. Easy.
Tags: Music, Topic Replies, Suhr, PCB


Suhr Guitar Talk :: RE: Stainless Steel (fret wear)

Author: Drew7 Posted: Thu Jan 24, 2019 2:46 pm (GMT -7) Topic Replies: 17 DaeniusZ wrote: OP said the guitar is relatively new right? It's less than a year old and I assume he takes good care of it. I think Suhr also uses a tougher nickel steel (like PRS) than most other brands? Although that would make the fret wear mystery even more weird because it's not easy to wear out that tougher kind of nickel steel either. The frets do look super clean but I think they could still b...
Tags: Music, Topic Replies, DaeniusZ, Suhr



Filters
show more filters
January - 2019
MoTuWeThFrSaSu
 123456
78910111213
14151617181920
21222324252627
28293031   
February - 2019
MoTuWeThFrSaSu
    123
45678910
11121314151617
18192021222324
25262728   
March - 2019
MoTuWeThFrSaSu
    123
45678910
11121314151617
18192021222324
25262728293031